BXMGY - ME-1010 IMMERSION TIN
- MSDS: BXMGY
- Manufacturer: MACDERMID INC
- Product Name: ME-1010 IMMERSION TIN
- National Stock Number: 6850-00F040720
Product Identification
Product ID:ME-1010 IMMERSION TIN
MSDS Date:02/18/1988
FSC:6850
NIIN:00F040720
MSDS Number: BXMGY
Responsible Party
EDEN PRAIRIE, MN 55344-5000
US
Emergency Phone: 612-944-9141
Info Phone: 612-944-9141
Preparer: JOHN J KASPER
Cage: MACDE
Contractor
Telephone: (800) 328-2942 OR (612) 944-9441
Cage: MACDR
Ingredients
HYPOPHOSPHORUS ACID *95-2*
CAS: 6303-21-5
Fraction By Weight: 1-10%
THIOUREA (SUSP ANIMAL CARC BY IARC GROUP 2B; SUSPECTED
CAS: 62-56-6
RTECS: YU2800000
Fraction By Weight: 1-10%
EPA Report Quantity: 10 LBS
DOT Report Quantity: 10 LBS
HYDROCHLORIC ACID, HYDROGEN CHLORIDE, MURIATIC ACID
CAS: 7647-01-0
RTECS: MW4025000
Fraction By Weight: 1-10%
EPA Report Quantity: 5000 LBS
DOT Report Quantity: 5000 LBS
STANNOUS CHLORIDE
CAS: 7772-99-8
RTECS: XP8700000
Fraction By Weight: 1-10%
Hazards
LD50 LC50 Mixture:ORAL LD50 (ALBINO RATS): 1750 MG/KG
Routes of Entry: Inhalation:YES Skin:YES Ingestion:NO
Reports of Carcinogenicity:NTP:YES IARC:YES OSHA:NO
Health Hazards Acute and Chronic:HARMFUL IF SWALLOWED, INHALED/ABSORBED
THROUGH SKIN. CAUSES IRRITATION/BURNS. EYES/SKIN: CORROSIVE
W/POSSIBLE PERMANENT DAMAGE. INHALATION: SEVERE RESPIRATORY
IRRITATION.
Explanation of Carcinogenicity:SEE INGREDIENTS. NTP HAS IDENTIFIED
THIOUREA AS A SUSPECT CANCER CAUSING AGENT BASED ON EVIDENCE IN
EXPERIMENTAL ANIMALS
Effects of Overexposure:IRRITATION, BURNS.
First Aid
First Aid:EYES: IMMEDIATELY FLUSH W/WATER FOR 15 MINS. SKIN: FLUSH
W/WATER FOR 15 MINS. LARGE SPLASH: FLOOD BODY UNDER A SHOWER.
INGESTION: DON'T INDUCE VOMITING. GIVE WATER. INHALATION: REMOVE TO
FRESH AIR. TR EAT SYMPTOM. OBTAIN MEDICAL ATTENTION IN ALL CASES.
NOTE TO PHYSICIAN: NO SPECIFIC ANTIDOTE. IF UNCONSCIOUS, HAVING
TROUBLE BREATHING/CONVULSIONS, DON'T INDUCE VOMITING/GIVE WATER.
(SEE SUPP).
Fire Fighting
Flash Point Method:PMCC
Flash Point:NONE
Extinguishing Media:USE WATER SPRAY/FOG, THOROUGHLY DRENCHING
Fire Fighting Procedures:USE WATER TO COOL EXPOSED CONTAINERS. WEAR
SELF CONTAINED BREATHING APPARATUS.
Unusual Fire/Explosion Hazard:CONTACT W/REACTIVE METALS (ALUMINUM) MAY
RESULT IN THE GENERATION OF FLAMMABLE HYDROGEN GAS.
Accidental Release
Spill Release Procedures:SMALL: CONTAIN W/ABSORBENT MATERIAL. SHOVEL
RECLAIMED LIQUID & ABSORBENT INTO RECOVERY/SALVAGE DRUMS FOR
DISPOSAL. LARGE: DIKE TO PREVENT FURTHER MOVEMENT & RECLAIM INTO
RECOVERY/SALVAGE DRUMS/TANK TR UCK FOR DISPOSAL.
Handling
Handling and Storage Precautions:EMPTY CONTAINERS MAY CONTAIN RESIDUAL
PRODUCT. DON'T REUSE CONTAINER UNLESS PROPERLY RECONDITIONED. USE
ADEQUATE VENTILATION.
Other Precautions:AVOID CONTACT W/EYES, SKIN & CLOTHING. AVOID
BREATHING MIST. KEEP OUT OF REACH OF CHILDREN.
Exposure Controls
Respiratory Protection:NIOSH APPROVED/EQUIVALENT RESPIRATOR. LARGE
SPILLS: ENTRY LARGE TANKS, VESSELS, ENCLOSED SMALL SPACES
W/INADEQUATE VENTILATION, A PRESSURE DEMAND, SELF CONTAINED
BREATHING APPARATUS.
Ventilation:GENERAL VENTILATION
Protective Gloves:REQUIRED
Eye Protection:FACE SHIELD W/CHEMICAL SPLASH GOGGLES
Other Protective Equipment:APRON, SHOES, FULL SLICKER SUIT IF GROSS
EXPOSURE IS POSSIBLE.
Work Hygienic Practices:REMOVE/LAUNDER CONTAMINATED CLOTHING BEFORE
REUSE. THOROUGHLY WASH AFTER HANDLING.
Supplemental Safety and Health
FIRST AID CONT'D: PROBABLE MUCOSAL DAMAGE MAY CONTRAINDICATE THE USE OF
GASTRIC LAVAGE. MEASURES AGAINST CIRCULATORY SHOCK, RESPIRATORY
DEPRESSION & CONVULSIONS MAY BE NEEDED. MATERIALS TO AVOID CONT' D:
STRONG OXIDIZERS/AMMONIA/CARBONATES/SODIUM/POTASSIUM/CALCIUM
HYDROXIDES/CYANIDES/SULFIDES/CHLORITES
Chemical Properties
Boiling Pt:B.P. Text:>212F
Spec Gravity:1.06
pH:1.5
Solubility in Water:COMPLETE
Appearance and Odor:CLEAR LIQUID W/FAINT SULFUR ODOR
Stability
Stability Indicator/Materials to Avoid:YES
ALCOHOLS/AMINES/NITRATES/BROMINE FLUORIDE/CALCIUM CARBIDE/HYDRAZINE
HYDRATE/ETHYLENE OXIDE/HYDROGEN PEROXIDES (SEE SUPP)
Hazardous Decomposition Products:HYDROGEN CHLORIDE, STANNIC OXIDE,
PHOSPHINE GAS
Disposal
Waste Disposal Methods:HAZARDOUS LIQUID WASTE MUST BE SOLIDIFIED BEFORE
DISPOSAL IN A LANDFILL. CAN BE DEEP WELL INJECTED IAW/FEDERAL,
STATE & LOCAL REGULATIONS. CORROSIVE LIQUID. UN1760.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.